![]() ![]() When changing the fluid, always refer to the manufacturer's information for the specifications. * JLM DOT 4 brake fluid and clutch fluid is not suitable for vehicles with mineral fluid systems, such as Citroën. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid affects the paint, so immediately remove with plenty of water in the event of a spill. Please note: Do not refill used brake fluid containers and do not use these containers for other fluids. 116 defines grades DOT 3, DOT 4, DOT 5 and DOT 5.1, where DOT refers to. Only store brake fluid in the original packaging, keeping the packaging clean and tightly closed to prevent water penetration The Federal Motor Vehicle Safety Standards (FMVSS) under FMVSS Standard No. Dirt, moisture, petroleum products and other materials can result in a defective braking system or costly repairs. JLM DOT 4 can be mixed with other brake fluids that meet these specifications.Īlways respect the car manufacturer's instructions when changing brake fluid. JLM DOT 4 brake fluid and clutch fluid is available in half litre packaging (J04840) and litre packaging (J04845). 116 DOT 4 & DOT 3, SAE J1703 & 1704 and ISO (Classes 3 & 4) specifications. JLM DOT 4 fluid exceeds the current international U.S. Material:This product is hydraulic synthetic brake fluid,uses high efficient. A premium aftermarket brake and clutch fluid for the hydraulic brake systems and clutch systems of all passenger cars, vans and motorcycles, for which the manufacturer prescribes synthetic (non-petroleum based) fluids.* FMVSS NO.116 DOT3 national standard hydraulic dot3 & dot4 brake fluid oil. However, automotive manufacturers are increasingly switching to brake fluid with a safer boiling point of 260 degrees.įor instance, JLM DOT 4. Brake fluid has had a boiling point of approximately 230 degrees Celsius for many years. This causes air bubbles in the braking system and reduces the braking effect drastically. It is recommended for situations where DOT 3 level is required in brake and clutch systems of. Because of the ingredients that make up brake fluid, the fluid attracts water, which could cause the fluid to boil during braking. Crown DOT-4+ brake fluid is the best performing brake fluid that meets ISO 4925 Class 6, FMVSS No. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |